|Place of Origin:||China|
|Minimum Order Quantity:||1 set|
|Packaging Details:||PE bag+ carton|
|Delivery Time:||5-10 days|
|Working Voltage:||24VDC||Working Current:||15A|
|PWM Speed Control:||Duty Cycle 0-100%||Speed Pulse Signal Output:||YES|
1: This brushless DC motor driver board is widely apply to DC Brushless with Hall sensor (120°angle) three-wire motors
2:please make sure to add heat sink when the output power more than 60W.
When installing the heat sink, please add insulation layer for 6pcs MOS. It will damage the driver board permanently without insulation,and also apply Heat-Conducting Silicone Grease on the insulation for better cooling.
3: As the BLDC motor factory may use different Hall sequence,if the motor start abnormal, can't start or the current getting to high, please adjust the sequence of the Hall, or the driver will be damaged.
4:Please offer the right voltage to the driver, do not exceed the operating range. and the driver has built-in 5V for speed control, DO NOT connect extra power supply( 5V ) into the driver for speed controlling, it will damage the driver.
|Operating Voltage||DC 12V-36V|
|Speed control||0.1V-5V or PWM input|
|Protection||Overload protection, locked-rotor protection, over-current protection|
|Functions||Speed pulse signal output, soft reversing (485,CAN port optional)|
|Overall dimension||63X42.5X17mm (L*W*H)|
|Net weight||55 g|
Speed regulating potentiometer
external 5 digit tachometer