Home ProductsBrushless DC Motor Driver

Hall Effect 12 Volt Motor Controller , BLDC Motor Driver Circuit Board JYQD - V7.3E2

Hall Effect 12 Volt Motor Controller , BLDC Motor Driver Circuit Board JYQD - V7.3E2

    • Hall Effect 12 Volt Motor Controller , BLDC Motor Driver Circuit Board JYQD - V7.3E2
    • Hall Effect 12 Volt Motor Controller , BLDC Motor Driver Circuit Board JYQD - V7.3E2
  • Hall Effect 12 Volt Motor Controller , BLDC Motor Driver Circuit Board JYQD - V7.3E2

    Product Details:

    Place of Origin: China
    Brand Name: JUYI
    Model Number: JYQD-V7.3E2

    Payment & Shipping Terms:

    Minimum Order Quantity: 1 set
    Price: Negotiable
    Packaging Details: PE bag+ carton
    Delivery Time: 5-10 days
    Payment Terms: T/T,L/C,Paypal
    Supply Ability: 1000sets/day
    Contact Now
    Detailed Product Description
    Working Voltage: 12VDC Working Current: 15A
    PWM Speed Control: YES Speed Pulse Signal Output: YES
    CONTINUOUS OPERATING CURRENT: 15A Bare Board: Yes

    12VDC Hall effect BLDC motor driver circuit board JYQD-V7.3E2 ,15A working current
     

    MODEL:JYQD-V7.3E2

    OPERATING TEMPERATURE(℃):-20—85℃

    OPERATING VOLTAGE(V):12V-36V

    MAX CURRENT (A):16A

    CONTINUOUS OPERATING CURRENT:15A

    PWM SPEED REGULATION:Duty cycle 0-100%(1-20KHZ)

    ANALOG VOLTAGE SPEED REGULATION (V):0-5V

    Speed pulse signal output:YES

     

     
    Application guidelines
     
    1. Confirm that the voltage and power parameters of the motor not exceed the range as specified.
     
    2. Applicable to hall brushless dc motor with Hall at 120°, not all manufacturers' Hall line sequence are corresponding, you can adjust the Hall line sequence or motor three-phase line sequence according to the actual situation, to achieve the best driving effect.
     
    3. JYQD-V7.3E2 is driver board without housing and heatsink, it can drive the motor below 100 watt without any heatsink, but needs normal ventilation.
     
    4. The 5V output port on the drive board is forbidden to connect external power equipment. It is only applicable to external potentiometer or switch for speed adjustment, commutation and enabling operation
    Hall Effect 12 Volt Motor Controller , BLDC Motor Driver Circuit Board JYQD - V7.3E2
     
     
     
    Wiring diagram
    Hall Effect 12 Volt Motor Controller , BLDC Motor Driver Circuit Board JYQD - V7.3E2
     
    1. Control port
    5V —Driver board internal output voltage, external potentiometer or switch for speed adjustment and reversing operation
    Z/F —Rotating direction control ports. Connect “5V” high level or no connect is Forward direction, connect 0 V low level or connect to GND is reverse direction.
    VR —Speed control port. Analog voltage linear speed regulation 0.1v -5V, The input resistance is 20K Ohm ,connect with GND when input PWM speed regulation, PWM frequency:1-20KHZ; Duty cycle 0-100%
    EL —Enable port control. Connect 5V or no connect to allow operation, connect GND to forbid operation.
    Signal— Speed pulse signal output
    GND—Used for Driver board internal control
     
    2. Power port
    MA ----motor phase A
    MB ---- motor phase B
    MC---- motor phase C
    P- ----DC-
    P+----DC +
     
    3:Hall sensor port
    Ha--- Hall a
    Hb---Hall b
    Hc---Hall c
    GND---GND
    5V---5V output
     
    4.  Use shielded wires if the drivers board has more than 50 cm distance from the motor, otherwise it may lead to abnormal driving, affecting the normal use.
    5. Control port distance: 2.54mm,Power port distance:3.96 mm
    6. Pay attention to the insulation between the driver MOSFET and the heatsink or the installation plate.
     
     
     
    Dimensional drawing
    Hall Effect 12 Volt Motor Controller , BLDC Motor Driver Circuit Board JYQD - V7.3E2
    Hall Effect 12 Volt Motor Controller , BLDC Motor Driver Circuit Board JYQD - V7.3E2
     
    DOWNLOAD JYQD-V7.3E2 USER MANUAL
    Hall Effect 12 Volt Motor Controller , BLDC Motor Driver Circuit Board JYQD - V7.3E2JYQD-V7.3E2-English.pdf

    Contact Details
    OWO INTERNATIONAL TRADING CO.,LTD

    Contact Person: Amigo Deng

    Send your inquiry directly to us (0 / 3000)

    Contact

    Address: No.8 Tianshan road,Changzhou city,Jiangsu,China

    Factory Address:No.28 Shunyuan road,Changzhou city,Jiangsu,China & No.1199 Yunpin road,Jiading district,Shanghai,China