Home ProductsBrushless DC Motor Driver

OWO INTERNATIONAL TRADING CO.,LTD

12-24VDC JYQD-V8.10B Bldc Brushless Motor Driver Board For Sensorless Motor

    • 12-24VDC JYQD-V8.10B Bldc Brushless Motor Driver Board For Sensorless Motor
    • 12-24VDC JYQD-V8.10B Bldc Brushless Motor Driver Board For Sensorless Motor
  • 12-24VDC JYQD-V8.10B Bldc Brushless Motor Driver Board For Sensorless Motor

    Product Details:

    Brand Name: JUYI
    Model Number: JYQD-V8.10B

    Payment & Shipping Terms:

    Minimum Order Quantity: 1 set
    Contact Now
    Detailed Product Description
    Workingvoltage: 12-24V Max Working Current: 2A
    Application: Sensorless Motor Driver Board Operating Temp.: -20—85℃

     
    JYQD-V8.10B 12V/24V DC BLDC motor driver board for sensorless motor
    12-24VDC JYQD-V8.10B Bldc Brushless Motor Driver Board For Sensorless Motor
    (For Brushless Sensorless DC motor )
    Model number JYQD-V8.10B
    Operating temp. -20—85℃
    Operating voltage 12V-24V
    Max current 3A
    Cont.working current 2A
    · PWM speed control PWM frequency:1-20KHZ; Duty cycle 0-100%
    Analog voltage speed regulation 0-5V
    O.V / L.V protection YES
    Speed pulse signal output YES
     
    Application notes:
    1. Confirm that the voltage and power parameters of the motor not exceed the range of the driver board as specified.
     
    2. This driver board is used for 3-phase brushless sensorless motor, but not suit for all 3-phase brushless sensorless motors directly. If the driving effect is not good (such as starting jitter, reversing, the motor noload working current is too large, the speed is not stable, the efficiency is low, and can’t start-up with load.) Customers can adjust the resistance and capacitance of the driver board according to the actual situation to achieve the best driving effect (see the attachment for how to do the adjustment)
     
    3. JYQD-V8.10B driver board is bare board without housing and heatsink. If the power of the motor below 36W ,it does not need to add heatsink, It only needs to ensure normal ventilation and well insulation. If the power of the motor more than 36W, it must add heatsink.
     
    4. Please take note that JYQD-V8.10B driver board has no anti-reverse connection protection, it will permanently damage the driver board if reversed polarity connection.
     
    5. The 5V output port on the driver board prohibits connect external device. It is only applicable to the external potentiometer and switch of the board for speed regulation and reversal.
     
     
    12-24VDC JYQD-V8.10B Bldc Brushless Motor Driver Board For Sensorless Motor
     
     
     
    Driver board diagram
     
    Wiring diagram
    12-24VDC JYQD-V8.10B Bldc Brushless Motor Driver Board For Sensorless Motor
    5V -----Driver board internal output voltage
    M ---- Motor speed pulse signal output port, 5V pulse signal.
     
     
    1. Control port
    Z/F---- Rotating direction control ports. Connect “5V” high level or no connect is Forward direction, connect 0 V low level or connect to GND is reverse direction.
    VR ----Speed control port. Analog voltage linear speed regulation 0.1v -5V, The input resistance is 20K Ohm ,connect with GND when input PWM speed regulation, PWM frequency:1-20KHZ; Duty cycle 0-100%
    GND—Used for Drive board internal control
    2. Power port
    MA ----motor phase A
    MB ---- motor phase B
    MC---- motor phase C
    GND----DC-
    VCC----DC +
     
    3. Use shielded wires if the drivers board has more than 50 cm distance from the motor, otherwise it may lead to abnormal driving, affecting the normal use.
     
    4.Control port distance: 2.54mm,Power port distance:2.54 mm
     
    5. Pay attention to the insulation between the driver MOSFET and the heatsink or the installation plate.
     
     
    Dimensional drawing
    12-24VDC JYQD-V8.10B Bldc Brushless Motor Driver Board For Sensorless Motor
    DOWNLOAD JYQD-V8.10B USER MANUAL

    Contact Details
    OWO INTERNATIONAL TRADING CO.,LTD

    Contact Person: Amigo Deng

    Send your inquiry directly to us (0 / 3000)

    Contact

    Address: No.8 Tianshan road,Changzhou city,Jiangsu,China

    Factory Address:No.28 Shunyuan road,Changzhou city,Jiangsu,China & No.1199 Yunpin road,Jiading district,Shanghai,China