Home ProductsBrushless DC Motor Driver

JYQD_V6.3E2 Brushless DC Motor Driver

JYQD_V6.3E2 Brushless DC Motor Driver

    • JYQD_V6.3E2 Brushless DC Motor Driver
    • JYQD_V6.3E2 Brushless DC Motor Driver
    • JYQD_V6.3E2 Brushless DC Motor Driver
    • JYQD_V6.3E2 Brushless DC Motor Driver
    • JYQD_V6.3E2 Brushless DC Motor Driver
    • JYQD_V6.3E2 Brushless DC Motor Driver
  • JYQD_V6.3E2 Brushless DC Motor Driver

    Product Details:

    Place of Origin: China
    Brand Name: JUYI
    Model Number: JYQD-V6.3E2

    Payment & Shipping Terms:

    Minimum Order Quantity: 1 set
    Price: Negotiable
    Packaging Details: PE bag+ carton
    Delivery Time: 5-10 days
    Payment Terms: T/T,L/C,Paypal
    Supply Ability: 1000sets/day
    Contact Now
    Detailed Product Description
    Working Voltage: 24V Working Current: 15A
    Speed Control: 0-5V Speed Pulse Signal Output: Yes
    O.V / L.V Protection: Yes Color: Green
    High Light:

    15a Brushless DC Motor Driver

    ,

    24V Brushless DC Motor Driver

    ,

    JYQD-V6.3E2

    24VDC 3-phase BLDC motor PWM speed driver for sensorless BLDC motor JYQD-V6.3E2

     

     

    Model number JYQD-V6.3E2
    Operating temp. -20—85℃
    Operating voltage 24V
    Cont.working current 15A
    · PWM speed control PWM frequency:1-20KHZ; Duty cycle 0-100%
    Analog voltage speed regulation 0-5V
    O.V / L.V protection Include
    Speed pulse signal output Include
     

     

    Application notes:
    1. Confirm that the voltage and power parameters of the motor not exceed the range of the driver board as specified.
    2. This driver board is used for 3-phase brushless sensorless motor, but not suit for all 3-phase brushless sensorless motors directly. If the driving effect is not good (such as starting jitter, reversing, the motor noload working current is too large, the speed is not stable, the efficiency is low, and can’t start-up with load.) Customers can adjust the resistance and capacitance of the driver board according to the actual situation to achieve the best driving effect (see the attachment for how to do the adjustment)
    3. JYQD-V6.3E2 driver board is bare board without housing and heatsink. If the power of the motor below 60W ,it does not need to add heatsink, It only needs to ensure normal ventilation and well insulation. If the power of the motor more than 100W, it must add heatsink like the diagram as below.
    4. The “Signal” terminal on the JYQD-V6.3E2 driver board is the motor speed pulse output signal (push-pull output), and the maximum output current is less than 5mA.
     

     

    JYQD_V6.3E2 Brushless DC Motor Driver 0
                                Driver board diagram                                         Driver board diagram with heatsink
     
     
     
    Wiring diagram
    JYQD_V6.3E2 Brushless DC Motor Driver 1
     
    5V -----Driver board internal output voltage
    Signal ---- Motor speed pulse signal output port, 5V pulse signal.
     
    1. Control port
    Z/F---- Rotating direction control ports. Connect “5V” high level or no connect is Forward direction, connect 0 V low level or connect to GND is reverse direction.
    VR ----Speed control port. Analog voltage linear speed regulation 0.1v -5V, The input resistance is 20K Ohm ,connect with GND when input PWM speed regulation, PWM frequency:1-20KHZ; Duty cycle 0-100%
    GND—Used for Drive board internal control
     
    2. Power port
    MA ----motor phase A
    MB ---- motor phase B
    MC---- motor phase C
    GND----DC-
    VCC----DC +
     
    3. Use shielded wires if the drivers board has more than 50 cm distance from the motor, otherwise it may lead to abnormal driving, affecting the normal use.
     
    4.Control port distance: 2.54mm,Power port distance:3.96 mm
     
    5. Pay attention to the insulation between the driver MOSFET and the heatsink or the installation plate.
     
     
    Dimensional drawing
    JYQD_V6.3E2 Brushless DC Motor Driver 2
    JYQD_V6.3E2 Brushless DC Motor Driver 3
     
     

    Contact Details
    OWO INTERNATIONAL TRADING CO.,LTD

    Contact Person: Ivan Zhu

    Send your inquiry directly to us (0 / 3000)

    Contact

    Address: No.8 Tianshan road,Changzhou city,Jiangsu,China

    Factory Address:NNo.28 Shunyuan road,Changzhou city,Jiangsu,China & No.1199 Yunpin road,Jiading district,Shanghai,China