Home ProductsBrushless DC Motor Driver

Non Inductive Motor Control Driver Speed ​​Control Board Reversing Board

Non Inductive Motor Control Driver Speed ​​Control Board Reversing Board

    • Non Inductive Motor Control Driver Speed ​​Control Board Reversing Board
    • Non Inductive Motor Control Driver Speed ​​Control Board Reversing Board
    • Non Inductive Motor Control Driver Speed ​​Control Board Reversing Board
    • Non Inductive Motor Control Driver Speed ​​Control Board Reversing Board
    • Non Inductive Motor Control Driver Speed ​​Control Board Reversing Board
    • Non Inductive Motor Control Driver Speed ​​Control Board Reversing Board
  • Non Inductive Motor Control Driver Speed ​​Control Board Reversing Board

    Product Details:

    Place of Origin: China
    Brand Name: JUYI
    Model Number: JYQD-V8.3E

    Payment & Shipping Terms:

    Minimum Order Quantity: 1 set
    Price: Negotiable
    Packaging Details: PE bag+ carton
    Delivery Time: 5-10 days
    Payment Terms: T/T,L/C,Paypal
    Supply Ability: 1000sets/day
    Contact Now
    Detailed Product Description
    Working Voltage: 12V DC Working Current: 15A
    Application: Air Coolingr Fan Suitable Motor: Sensorless BLDC Motor
    Operating Temp.: -20 - 85℃ Add Heatsink: >100 Watt
    High Light:

    brushless motor driver

    ,

    3 phase motor driver

     
    12V DC JYQD-V8.3E sensorless BLDC motor speed driver board for cooling fan controller
     
     
    Model number JYQD-V8.3E
    Operating temp. -20—85℃
    Operating voltage 12V
    Max current 15A
    ·PWM speed control PWM frequency:1-20KHZ; Duty cycle 0-100%
    O.V / L.V protection YES
    Add heatsink >100 watt
     
     
     
    Non Inductive Motor Control Driver Speed ​​Control Board Reversing Board 0
    Wiring diagram
    Non Inductive Motor Control Driver Speed ​​Control Board Reversing Board 1
    5V BLDC motor Driver board internal output voltage
    M Motor speed pulse signal output port, 5V pulse signal.
    Z/F Rotating direction control ports. Connect “5V” high level or no connect is Forward direction, connect 0 V low level or connect to GND is reverse direction.
    VR Speed control port. Analog voltage linear speed regulation 0.1v -5V, The input resistance is 20K Ohm ,connect with GND when input PWM speed regulation, PWM frequency:1-20KHZ; Duty cycle 0-100%
    GND Used for Drive board internal control

     

    2. Power port
    MA motor phase A
    MB motor phase B
    MC motor phase C
    GND DC-
    VCC DC +

     

    3. Use shielded wires if the drivers board has more than 50 cm distance from the motor, otherwise it may lead to abnormal driving, affecting the normal use.
     
    4.Control port distance: 2.54mm,Power port distance:3.96 mm
     
    5. Pay attention to the insulation between the BLDC motor driver MOSFET and the heatsink or the installation plate.
     
    Dimensional drawing
    Non Inductive Motor Control Driver Speed ​​Control Board Reversing Board 2
     
    Application notes:
    1. Confirm that the voltage and power parameters of the motor not exceed the range of the BLDC motor driver board as specified.
    2. This BLDC motor driver board is used for 3-phase brushless sensorless motor, but not suit for all 3-phase brushless sensorless motors directly. If the driving effect is not good (such as starting jitter, reversing, the motor noload working current is too large, the speed is not stable, the efficiency is low, and can’t start-up with load.) Customers can adjust the resistance and capacitance of the driver board according to the actual situation to achieve the best driving effect (see the attachment for how to do the adjustment)
     
    3. JYQD-V8.3E sensorless BLDC motor driver board is bare board without housing and heatsink. If the power of the motor below 60W ,it does not need to add heatsink, It only needs to ensure normal ventilation and well insulation. If the power of the motor more than 60W, it must add heatsink like the diagram as below.
     
    4. Please take note that JYQD-V8.3E BLDC motor driver board has no anti-reverse connection protection, it will permanently damage the driver board if reversed polarity connection.
     
    5. The 5V output port on the driver board prohibits connect external device. It is only applicable to the external potentiometer and switch of the board for speed regulation and reversal.
     
    6. The “M” terminal on the JYQD-V8.3E BLDC motor driver board is the motor speed pulse output signal (push-pull output), and the maximum output current is less than 5mA.
     
    Non Inductive Motor Control Driver Speed ​​Control Board Reversing Board 3
    DOWNLOAD JYQD-V8.3E USER MANUAL FOR MORE DETAILS
    Non Inductive Motor Control Driver Speed ​​Control Board Reversing Board 4JYQD-V8.3E-English.pdf
     
     
     
     

    Contact Details
    OWO INTERNATIONAL TRADING CO.,LTD

    Contact Person: Ivan Zhu

    Send your inquiry directly to us (0 / 3000)

    Contact

    Address: No.8 Tianshan road,Changzhou city,Jiangsu,China

    Factory Address:NNo.28 Shunyuan road,Changzhou city,Jiangsu,China & No.1199 Yunpin road,Jiading district,Shanghai,China